Bale tongs
The bale tongs allow you to gently handle round bales and wrapped bales without damaging them.
The arms are hydraulically operated.
Adapters for farming
Beet/potato/onion etc. cutter RS 1800
- width 2100 mm
- capacity approx. 1000 kg of beet/potatoes, etc.
- weight approx. 1100 kg
- removable potato liner
- hydraulic protection against stones
- required oil flow 40 - 100 l/min
Bale Splitter Duo Power 2.0
- Swivel exhaust pipe (180°)
- feeding conveyor
- hydraulically operated loading face
- required oil flow 60 - 120 l/min
- inlet opening width 1500 mm
- designed for square and round straw bales (free of binding strings or netting)
- weight approx. 1190 kg
- Control panel (12V)
Large-volume buckets
- They are intended for front loaders, handlers, front loaders of tractors, skid steer loaders, etc.
- They are intended for the handling of lightweight materials, such as wooden chips, sawdust, bark, cereals and other materials up to a specific weight of 0.8 t/m.
We manufacture the loading bucket with attachment according to the machine type.
The dimensions and design, as well as size of the loading buckets depend on the machine type, work method, type of the handled material and customer’s requirements.
The buckets are made of high-strength steel, stressed parts are made of high-strength and abrasion resistant steel materials “HARDOX 450”.
The buckets are fitted with a basic induction-tempered bit and they can be fitted also with a welded or screwed sub-bit, configured as one whole or as a sectional system.
The buckets can be fitted with a plastic bit as well.
Moreover, the buckets can be fitted also with a protective collar against material overfalls into the boom area
According to the type of the loader and the material handled we will recommend you the most suitable size or appropriate modifications.
Standard loading buckets
- They are intended for front loaders, handlers, front loaders of tractors, skid steer loaders, etc.
- They are intended for the handling of standard building materials, such as sand, crushed aggregate and other materials up to a specific weight of 1.8t/m3
We manufacture loading buckets with attachment systems according to the machine type.
The dimensions and design, as well as size of the loading buckets depend on the machine type, work method, type of the handled material and customer’s requirements.
The buckets are made of high-strength steel, stressed parts are made of high-strength and abrasion resistant steel materials “HARDOX 450”.
The buckets are fitted with a basic induction-tempered bit and they can be fitted also with a welded or screwed sub-bit, configured as one whole or as a sectional system.
The buckets can be equipped with the following accessories:
- Tooth system and segments between teeth.
- Strengthening of the lower part of the bucket with the help of welded-on or screwed footing soles
- Protective collar against material overfalls into the boom area
According to the type of the loader and the material handled we will recommend you the most suitable size or appropriate modifications.
Tipping buckets
They are intended for front loaders, front loaders of tractors, skid steer loaders, etc.
- Designed for the handling of lightweight materials, such as wooden chips, sawdust, bark, cereals and other materials up to a specific weight of 0.8 t/m3
- In a reinforced design for materials, such as sand, crushed aggregate and other materials up to a specific weight of 1.8 t/m3
Tipping buckets make it possible, thanks to their structure, to load loose material up to heights above 4m (according to the type of the machine). The tipping is controlled by the third hydraulic function of the front loader.
We manufacture buckets with attachments according to the type of the machine.
The dimensions and design, as well as size of the loading buckets depend on the machine type, work method, type of the handled material and customer’s requirements.
Tipping buckets of all sizes are made of high-strength and abrasion resistant steel materials “HARDOX 450”.
The buckets are fitted with a basic induction-tempered bit and they can be fitted also with a welded or screwed sub-bit, configured as one whole or as a sectional system.
The buckets can be equipped with the following accessories:
- Tooth system and segments between teeth.
- Protective collar against material overfalls into the boom area
According to the type of the loader and the material handled we will recommend you the most suitable size or appropriate modifications.
Buckets with SD holder
This device is intended for the handling of heterogeneous materials, such as litter, municipal waste, loose materials, branch wood, etc.
The bucket is delivered, on a standard basis, in a design with removable side boards.
The removable side boards are manufactured of the abrasion resistant steel materials “HARDOX 450”.
The robust holder with protected hydraulic motors is equipped with a safety valve protecting the system from damage.
We manufacture the loading device with the SD holder with attachments according to the machine type.
The dimensions and design, as well as the size of the devices depend on the machine type, work method, type of the handled material and customer’s requirements.
Modifications at the customer’s request:
- a change in technical parameters (width, shape of the holder, etc.)
- fixed side boards
- Grillage bottom with an insertion element
Side shifting buckets
- They are intended for front loaders, handlers, front loaders of tractors, skid steer loaders, etc.
- They are intended for the handling of standard building materials, such as sand, crushed aggregate and other materials up to a specific weight of 1.8t/m3
The buckets can be shifted by 500 mm to the right or left part from the machine axis.
We manufacture loading buckets with a side shifting system with attachments according to the machine type.
The dimensions and design, as well as size of the buckets with a side shifting system depend on the machine type, work method, type of the handled material and customer’s requirements.
The buckets are made of high-strength steel, stressed parts are made of high-strength and abrasion resistant steel materials “HARDOX 450”.
The buckets are fitted with a basic induction-tempered bit and they can be fitted also with a welded or screwed sub-bit, configured as one whole or as a sectional system.
Grillage buckets
- They are intended for front loaders, handlers, front loaders of tractors, skid steer loaders, etc.
- They are intended for the handling of standard building materials, such as sand, crushed aggregate and other materials up to a specific weight of 1.8t/m3
We manufacture the loading bucket with attachment according to the machine type.
The dimensions and design, as well as size of the grillage buckets depend on the machine type, work method, type of the handled material and customer’s requirements.
The buckets are made of high-strength steel, stressed parts are made of high-strength and abrasion resistant steel materials “HARDOX 450”.
The buckets are fitted with a basic induction-tempered bit and they can be fitted also with a welded or screwed sub-bit, configured as one whole or as a sectional system.
The buckets can be equipped with a tooth system and segments between teeth.
According to the type of the loader and the material handled we will recommend you the most suitable size or appropriate modifications.
Optional equipment at the customer’s request:
- Inserting bottom
- Inserting grillage according to the fraction
- Reinforcement of the lower part of the bucket with the help of welded-on or screwed footing soles
- Protective frame or “collar” against material overfalls into the boom area
Loading device with a holder - SV (with pins)
This device is intended for the handling of straw or hay packs, litter, municipal waste, branch wood, etc.
Reinforced forged pins are installed in cases.
The robust holder with protected hydraulic motors is equipped with a safety valve protecting the system from damage.
We manufacture the loading device with the SV holder with attachments according to the machine type.
The dimensions and design, as well as the size of the devices depend on the machine type, work method, type of the handled material and customer’s requirements.
The rear part of the loading device is manufactured as a through-sight piece and is equipped with a fencing system.
Modifications at the customer’s request:
- another filling of the rear part of SV
- a change in technical parameters (width, shape of the holder, etc.)
- length, numbers and deployment of pins
Stacking forks
The stacking fork is used to handle both square and round straw bales. The equipment is produced in configurations according to customer needs. The base consists of a solid frame, fitted with forged tines mounted in sleeves. The number, length and positioning of the tines is made according to the customer's requirements.
The device can be equipped with:
- protective mesh at the back of the adapter
- hydraulic holding device
Stacking forks are equipped with a hitch according to the machine type.
Silage takers
REDROCK : ALLIGATOR
- Reduction of loss in the silage pit by as much as 15%
- Elimination of secondary fermentation
- Clean silage pit
- Perfect cutting off for green fodder storage systems as well
Accessories:
- Hydraulic emptying system
- Four-side insert for loose materials
- Quick-grip hinge according to the machine type
Page 1 of 2
