Wood timber grabs 0.4
Adapters for wood processing
WOOD Grabs
- These grabs are intended for front loaders, handlers, front loaders of tractors, skid steer loaders, etc., with a hinge according to the machine type.
- According to the types of the loader and of the materials handled we will recommend to you the most suitable size and type or suitable modifications.
- The WOOD Grab can be used for most usual tasks connected with the handling of wood materials, in both entire lengths and in cut-outs.
- The grabs of all sizes are made of high-strength and abrasion resistant steel materials “HARDOX 450”.
Large-volume buckets
- They are intended for front loaders, handlers, front loaders of tractors, skid steer loaders, etc.
- They are intended for the handling of lightweight materials, such as wooden chips, sawdust, bark, cereals and other materials up to a specific weight of 0.8 t/m3
We manufacture the loading bucket with attachment according to the machine type.
The dimensions and design, as well as size of the loading buckets depend on the machine type, work method, type of the handled material and customer’s requirements.
The buckets are made of high-strength steel, stressed parts are made of high-strength and abrasion resistant steel materials “HARDOX 450”.
The buckets are fitted with a basic induction-tempered bit and they can be fitted also with a welded or screwed sub-bit, configured as one whole or as a sectional system.
The buckets can be fitted with a plastic bit as well.
Moreover, the buckets can be fitted also with a protective collar against material overfalls into the boom area
According to the type of the loader and the material handled we will recommend you the most suitable size or appropriate modifications.
Tipping buckets
They are intended for front loaders, front loaders of tractors, skid steer loaders, etc.
- Designed for the handling of lightweight materials, such as wooden chips, sawdust, bark, cereals and other materials up to a specific weight of 0.8 t/m3
- In a reinforced design for materials, such as sand, crushed aggregate and other materials up to a specific weight of 1.8 t/m3
Tipping buckets make it possible, thanks to their structure, to load loose material up to heights above 4m (according to the type of the machine). The tipping is controlled by the third hydraulic function of the front loader.
We manufacture buckets with attachments according to the type of the machine.
The dimensions and design, as well as size of the loading buckets depend on the machine type, work method, type of the handled material and customer’s requirements.
Tipping buckets of all sizes are made of high-strength and abrasion resistant steel materials “HARDOX 450”.
The buckets are fitted with a basic induction-tempered bit and they can be fitted also with a welded or screwed sub-bit, configured as one whole or as a sectional system.
The buckets can be equipped with the following accessories:
- Tooth system and segments between teeth.
- Protective collar against material overfalls into the boom area
According to the type of the loader and the material handled we will recommend you the most suitable size or appropriate modifications.
Buckets with SD holder
This device is intended for the handling of heterogeneous materials, such as litter, municipal waste, loose materials, branch wood, etc.
The bucket is delivered, on a standard basis, in a design with removable side boards.
The removable side boards are manufactured of the abrasion resistant steel materials “HARDOX 450”.
The robust holder with protected hydraulic motors is equipped with a safety valve protecting the system from damage.
We manufacture the loading device with the SD holder with attachments according to the machine type.
The dimensions and design, as well as the size of the devices depend on the machine type, work method, type of the handled material and customer’s requirements.
Modifications at the customer’s request:
- a change in technical parameters (width, shape of the holder, etc.)
- fixed side boards
- Grillage bottom with an insertion element
Loading device with a holder - SV (with pins)
This device is intended for the handling of straw or hay packs, litter, municipal waste, branch wood, etc.
Reinforced forged pins are installed in cases.
The robust holder with protected hydraulic motors is equipped with a safety valve protecting the system from damage.
We manufacture the loading device with the SV holder with attachments according to the machine type.
The dimensions and design, as well as the size of the devices depend on the machine type, work method, type of the handled material and customer’s requirements.
The rear part of the loading device is manufactured as a through-sight piece and is equipped with a fencing system.
Modifications at the customer’s request:
- another filling of the rear part of SV
- a change in technical parameters (width, shape of the holder, etc.)
- length, numbers and deployment of pins
Palletising device
The palletising device can be delivered in various configurations according to the customer’s requests. The bearing panel “ISO( FEM) 2 – 4” according to the type, the panel width is according to the customer’s wish.
Equipment of the palletising device is according to the customer’s wish:
- Bearing forks - width, thickness, length, load bearing capacity of the fork
- Side shifting
- Rotation
- Gripping jaws
- Telescopic fork, etc.
Timber and branch wood grabs
Installation on a hydraulic hand or through an adapter on front loaders and handlers.
Possibility of equipment with a rotator
Branch wood scrapers
Branch wood scrapers is a device designed for the raking of coniferous and deciduous residues after logging. It is equipped with a hanger according to the type of machine.
Special adapters for wood processing
Adapters for container loading.
